§ 11.08.140. Additional specifications—Driveways.

Driveways shall be constructed in accordance with the following specifications:

A.

The maximum single driveway width for commercial or multi-family properties shall not exceed 24 feet at the curb, excluding transitions.

B.

The maximum single driveway width for single-family residential properties shall not exceed 20 feet at the curb, excluding transitions.

C.

The minimum single driveway width shall be ten feet at the curb, excluding transitions.

D.

Where two or more adjoining driveways are provided for the same property, a full curb height safety island of not less than 15 feet, at the curb, must be provided. The safety island can be vegetated with grass or landscaping, or planted with trees. If the safety island must be paved, permeable pavement should be used if feasible.

E.

No driveway apron shall extend into the street further than the face of the curb.

F.

No driveway shall be located within 25 feet, including transitions, of a regular crosswalk area at an intersection or any other designated crosswalk area.

G.

No driveway shall be located within ten feet, including transitions, of a side lot line.

H.

No driveway may be located so as to conflict with power poles, street lights, fire hydrants, established street tree, or other above ground public facilities.

I.

Two-track driveway designs are allowed and encouraged on private property.

(Ord. 3567 § 1, 12/20/2016; Ord. 3366 § 1, 6/26/2009; Ord. 2886 § 1, 9/15/1995; Ord. 2166 § 14, 9/1/1981)