§ 17.11.050. Area, dimensional, and density requirements.
A.
The following area and dimensional requirements apply to all RS-9 zones:
Table 17.11.050-1: Area and Dimensional Requirements
Measurement Type Limit Minimum lot area 9,000 sf Minimum lot width/frontage 75 feet Density, minimum net n/a Density, maximum net 1 units/9,000 Maximum building height 30 feet Maximum lot coverage 30% Maximum site coverage 50% Minimum front setback 25 feet Garage entrance setback n/a Minimum rear setback 25 feet Minimum side setback 7 feet Minimum side setback (street) 13 feet Minimum side setback (alley) 10 feet Detached Accessory Structure Requirements
Minimum rear setback for accessory structures in the rear one-third of the lot 10 feet Minimum side setback for accessory structures in the rear one-third of the lot 3 feet Maximum building height Not to exceed the primary
structure building heightMaximum building footprint Not to exceed the primary
structure building footprintA 25% height bonus is available if the detached structure is within the building envelope required of a principal structure in the zone that the property is located.
B.
In locations where stormwater runoff from structures, paved driveways, sidewalks, patios and other surfaces is designed to infiltrate on-site, according to the requirements in Chapter 5 of the City of Port Angeles Urban Services Standards and Guidelines manual, portions of the project can be exempt from lot and site coverage calculations. (See PAMC 17.94.135 for exemptions.)
C.
Conditional uses. Conditional uses shall comply with the development standards in 17.94.065 PAMC.
(Ord. 3577 § 1, 3/21/2017; Ord. 3572 § 3, 12/20/2016; Ord. 3548 § 4, 1/5/2016; Ord. 3390 § 3, 1/30/2010; Ord. 3343 § 3, 1/1/2009; Ord. 3180 § 1 (part), 12/17/2004; Ord. 2948 § 5 (part), 2/14/1997; Ord. 2861 § 1 (part), 3/17/1995; Ord. 2385 § 2 (part), 3/28/1986; Ord. 1709 § 1 (part), 12/22/1970)