§ 17.21.200. Area and dimensional requirements.

A.

The following area and dimensional requirements apply to all CN zones:

Table 17.21.200-1: Area and Dimensional Requirements
Measurement Type	Limit
Minimum lot area	5,000 sf
Minimum lot width/frontage	50 feet
Maximum building height	35 feet
Maximum lot coverage	50%
Maximum site coverage	80%
Minimum front setback	15 feet from any alley or adjacent residential zone
Garage entrance setback
Minimum rear setback
Minimum side setback
Minimum side setback (street)	n/a
Minimum side setback (alley)	15 feet
Detached Accessory Structure Requirements
Minimum rear setback for accessory structures in the rear one-third of the lot	15 feet from any alley or adjacent residential zone
Minimum side setback for accessory structures in the rear one-third of the lot
Maximum building height	Not to exceed the primary structure building height
Maximum building footprint	Not to exceed the primary structure building footprint

 

A 25% height bonus is available if the detached structure is within the building envelope required of a principal structure in the zone that the property is located.

B.

In locations where stormwater runoff from structures, driveways, sidewalks, patios and other surfaces is designed to infiltrate on-site, according to the requirements in Chapter 5 of the City of Port Angeles Urban Services Standards and Guidelines manual, portions of the project can be exempt from lot and site coverage calculations. (See PAMC 17.94.135 for exemptions.)

(Ord. 3577 § 1, 3/21/2017; Ord. 3572 § 9, 12/20/2016; Ord. 3548 § 12, 1/5/2016; Ord. 3343 § 8, 1/1/2009; Ord. 3332 § 3, 4/25/2008; Ord. 3272, 2/16/2007; Ord. 3180 § 1 (part), 12/17/2004; Ord. 3042 § 3 (part) 1/28/2000; Ord. 2861 § 1 (part), 3/17/1995; Ord. 2797 § 3, 2/11/1994)