§ 17.22.200. Area and dimensional requirements.

A.

The following area and dimensional requirements apply to all CSD zones:

Table 17.22.200-1: Area and Dimensional Requirements
Measurement Type	Limit
Minimum lot area	n/a
Minimum lot width/frontage	50 feet
Maximum building height	35 feet
Maximum lot coverage	50%
Maximum site coverage	80%
Minimum front setback	15 feet from any alley or adjacent residential zone
Garage entrance setback
Minimum rear setback
Minimum side setback
Minimum side setback (street)	n/a
Minimum side setback (alley)	15 feet
Detached Accessory Structure Requirements
Minimum rear setback for accessory structures in the rear one-third of the lot	15 feet from any alley or adjacent residential zone
Minimum side setback for accessory structures in the rear one-third of the lot
Maximum building height	Not to exceed the primary structure building height
Maximum building footprint	Not to exceed the primary structure building footprint

 

All newly created lots shall have a minimum area adequate to provide for required setbacks and parking.

No loading structure or dock with access onto the alley shall be built within 15 feet of an alley. Driveway access onto an alley shall maintain a vision clearance triangle. The vision clearance triangle shall extend ten feet along the alley and 15 feet along the edge of the driveway, measured from the point of intersection of each side of the driveway and the alley right-of-way line.

A 25% height bonus is available if the detached structure is within the building envelope required of a principal structure in the zone that the property is located.

(Ord. 3577 § 1, 3/21/2017; Ord. 3572 § 10, 12/20/2016; Ord. 3548 § 13, 1/5/2016; Ord. 3332 § 4, 4/25/2008; Ord. 3272, 2/16/2007; Ord. 3180 § 1 (part), 12/17/2004; Ord. 3111 § 4, 3/15/2002; Ord. 3042 § 3 (part) 1/28/2000; Ord. 2977 § 1 (part), 12/26/1997; Ord. 2863 § 3, 4/14/1995; Ord. 2861 § 1 (part), 3/17/1995; Ord. 2797 § 4, 2/11/1994)